RSES Header Logo
Service Application Manuals
Category:     Chapters per page: 
Results: 19 Chapters Found
Previous | 1 2  | Next >

Efficiency Testing - Gas Residential and Small Commercial Heating Unit

Form #: 630-58
Topics covered in this chapter are: factor definition, test instruments required, basic instrument function, instruments for conversion and field assembled units, adjustment standards, fan control settings, stack temperature and the neutral point.

Residential and Commercial Light Oil Burners - Part 2

Form #: 630-74
This chapter will cover oil burner control components and their function running the gamut from simplicity to various levels of sophistication.

Installation, Maintenance, and Service of Recreational Vehicle Furnaces

Form #: 630-81
Topics of this chapter are installation, lighting the furnace, operation, maintenance, and troubleshooting tips (pilot model furnaces).

Residential Gas Furnace Heat Exchanger Testing

Form #: 630-92
This chapter contains the following: review of existing leak detection procedure, development of the improved Three Step Method, Three Step Method for detecting unacceptable flue gas, leakage from furnace heat exchangers, notes on equipment & procedures, field test procedure, conclusions and recommendations.

Condensing Gas Furnaces

Form #: 630-94
Some of the contents of this chapter are: start-up procedure, primary air adjustment, adjust pilot burner, check limit & fan control, check temperature rise, changing blower speeds, check main burner flame, and service.

Radiant Heating: Part 1

Form #: 650-008
This chapter provides a brief history of radiant heating, as well as an overview of the basic principles and types of radiant heat. The concept of thermal mass is explained, and several common control options are introduced.

Radiant Heating: Part 2

Form #: 650-009
This chapter describes the major differences between some of the more common heat sources in use today. “Traditional” heat sources, such as cast iron and copper fin-tube boilers, are contrasted with more efficient condensing boilers. Fuel sources, including electricity, oil, natural gas, and propane, are examined, as are “alternative” solar and geothermal systems.

Radiant Heating: Part 3

Form #: 650-010
This chapter explores the various types of tubing used in radiant heating systems, and illustrates proper piping layouts. Both framed floor and concrete slab designs are covered, and the differences between hydronic radiant systems and electric radiant heat are explained.

Radiant Heating: Part 4

Form #: 650-011
This chapter looks at the tubing options and main application profiles for snow-melting systems. Concrete slabs, brick pavers, and asphalt are all considered, as are turf-warming and frost protection systems. In addition, the property of refraction is explained as it relates to determining the freeze point of fluids used in exterior installations.

Results: 19 Chapters Found
Previous | 1 2  | Next >
  • 1911 Rohlwing Road, Suite A
  • Rolling Meadows, IL
  • 60008-1397
  • Toll Free Phone: 800/297-5660
  • Phone: 847-297-6464
  • general@rses.org

©2011 RSES. All Rights Reserved.