RSES Header Logo
Service Application Manuals
Category:     Chapters per page: 
Results: 16 Chapters Found
< Previous | 1 2  | Next >

Characteristics of Refrigerants

Form #: 620-10
This chapter covers a listing of dates and events that illustrate the development of the industry and the variety of refrigerants used. Many other gases were studied and some, such as the hydrocarbon group, have found limited use.

Moving to Alternative Refrigerants: Update

Form #: 620-102
To supplement previously published case histories, EPA presents six more case histories that focus on small supermarket and restaurant chains, and their experiences with equipment and refrigerant retrofits and replacements and the use of mitigating refrigerants.

Refrigerant 410A

Form #: 620-108
This chapter describes typical applications, recycling/recovery procedures and equipment, and precautions applicable to this new refrigerant product.

Mixed Refrigerants

Form #: 620-11
This chapter’s topic is “Should mixed refrigerants be used at all?” In general it would seem less complicated and more desirable to use a single refrigerant whenever one with suitable properties is available. However, in applications where the performance of single refrigerants may leave room for improvement, mixtures can be effectively used.

Temperature-Pressure Value of Common Refrigerants at Saturation

Form #: 620-111
This chapter contains information regarding the determination of commercial refrigeration head pressure for air-cooled condensers, evaporative condensers, and water-cooled condensers with the chart covering Temperature–Pressure Values of Common Refrigerants at Saturation.

Understanding Refrigerant Tables

Form #: 620-113
This chapter will review the older refrigerant (R-22) first, and then refer to one of the newer replacement refrigerants (R-410A).

Plotting the A/C Cycle on a Pressure-Enthalpy (Mollier) Diagram

Form #: 620-114
This chapter covers a discussion of how physical characteristic curves, or pressure-enthalpy diagrams, can be developed for stable refrigerants.

Using the PT Chart as a Service Tool

Form #: 620-115
The purpose of this chapter is not only to explain the pressure-temperature relationship, but also to illustrate how a P-T chart can be used to thoroughly analyze a refrigeration or air conditioning system

Working with Flammable Refrigerant Systems

Form #: 620-116
This chapter contains precautions and procedures for servicing flammable and nonflammable refrigerant systems.

What Technicians Need to Know about Phasing Out HCFC Refrigerants

Form #: 620-117
The information contained in this chapter will help you better adapt to changing industry practices and provide consumers with appropriate service and information. This chapter also answers some of the most frequently asked questions about the phasing out of HCFC Refrigerants (ex.: What alternatives to R22 are acceptable and available? Is EPA certification required to purchase R-410A or to service R-410A systems?)

Results: 16 Chapters Found
< Previous | 1 2  | Next >
  • 1911 Rohlwing Road, Suite A
  • Rolling Meadows, IL
  • 60008-1397
  • Toll Free Phone: 800/297-5660
  • Phone: 847-297-6464

©2011 RSES. All Rights Reserved.